This car competed in the 2018 Pikes Peak International Hill Climb driven by Randy Pobst finishing 3rd in class at 10.02.410 and 13th overall.
Purchased new MCRE 026. 2017 028 was delivered to Pikes Peak Racing 12/31/2017. It is now for sale and converted back to Trans Am 2 Series specifications.
A complete TA2 spares package including Pikes Peak specific aero modifications and AEM computer tuned for additional HP and altitude will go with the car.
This car has raced in only one event at a length of 12.42 miles. All other time on the car occurred during practice runs that are typically 4 miles in length. This car has less time on it than one Tran Am 2 event.
Priced at $99,900.00
This is an essentially new car with shake down time and a very limited event time.
As we are fanatical about maintenance 5 oil changes have been performed on this car including one immediately after the race.
Ilmore Penske Trans Am 2 small block Ford
Andrews 4 Speed transmission
DMI Quick Change rear end
TA2 legal AEM Infinity ECU (as delivered legal for TA2)
Complete nose including tubular substructure and splitter.
Left and right front Fenders
Windshield including wiper motor and arm
Left and right spindles
Left and right control arms
Set of used Ball Joints. (New set installed in the car for the race)
Upper “A” arm (same for left or right)
Front wheel spacers (6)
Pac spring sway bar (Different rate)
Brake Scoops – 2 pair
Brake ducting hose
Remote battery cable charging posts
Roll bar padding
Clutch slave T/O bearing
02 Sensors (2)
Brake Pads – Front and rear
Penske spring packers and bump stops
Quick change gear sets (7)
Front weight jackers
Brake bias adjustor and cable
Coil spring sets (3 pairs)
Pikes Peak large 1 piece splitter
Pikes Peak tall wing uprights
Billet 1 piece wing mounts that work with either TA2 or Pikes Peak uprights
Pikes Peak larger wing endplates
Spark plugs (3 sets)
Trans Am 2 Bassett wheels - 4 complete sets
Tire sets (8)
1 Race day only
NOTE: All photos in this ad are the property of the photographer. If you are that photographer and you would like credit please feel free to contact me so that I can fulfill your request.
#MGBGTV8, model 1976, V8 3.5 Rover prepared, 4BBL trolley carbs, and Offenhauser Allumin intake,5speed Rover LT77, doublefans elec, Kirkley Alumin seats,price 15500 Eur for trackdays or hillclimbs,
Ganci tranino Sablet Progettati per le competizioni e per 3000 Kg di trazione; sono costruiti in nastro per cinture racing ad alta resistenza. Ideali per il touning e per le vetture Abarth Lunghezza: 260 mm. Diametro foro: 15,5 mm Sono disp...
This engine it's in perfect working condition. for more info, contact me. Thanks
A freshly built MX5 Supercup car built by AK Motorsport but unfortunately work commitments have clashed with race weekend she has to go. very strong motor dyno'd at 139hp, freshly built using all the correct championship parts by AK Motorsport. ...
Martini F2 Mk.37 with BMW S14/7 2000 ccm engine for sale, car competed regularly in Czech hillclimb championship and European FIA hillclimb championschip since 2007 . Two sets of wheels and several spare parts included, boot for bodyshell fabricatio...